Click image to view full size image
1.The design of the blade widens the flow channel of the drill bit,effectively prevents mud clogging,and the asymmetrical blade layout reduces the wear of cutting teeth.
2.This design provides the drill bit with a stronger attack drilling speed,bringing users a more efficient drilling experience.
3.We have adopted an anti-rotation design to enhance the stability of the blade and increase the drilling speed.
| φ117.5KS413G | IADC Code S133 |
|
SPECIFICATION |
|||
|
Bit size(in) |
45/8" |
Connection |
2-7/8 API REG |
|
Bit size(mm) |
117.5 |
Recommended RPM(r/min) |
50-200 |
|
Number of blade |
4 |
Recommended WOB(KN) |
30-80 |
|
Primary cutter size(mm) |
13 |
Recommended flow ratellps) |
10-30 |
|
Nozzle qty |
4 |
Net/Gross weight(kg) |
12/21 |
|
Gauge length |
2"-3.5" |
Overall dimension(mm) |
430×200×190 |
01 Suitable for medium soft formations,such as limestone,clay layer,shale,etc.
02 Welding high-performance wear-resistant materials on the surface of the blade,
Enhance the strength of the blads,increase and deepen the waterway,and accelerate the discharge of mud debris
| φ152.4KS813G |
IADC Code S433 |
|
SPECIFICATION |
|||
|
Bit size(in) |
6" |
Connection |
3-1/2"API REG |
|
Bitsize(mm) |
152.4 |
Recommended RPM(r/min) |
60-250 |
|
Number of blade |
8 |
Recommended WOB(KN) |
10-100 |
|
Primary cutter size(mm) |
13 |
Recommended flow ratellps) |
20-35 |
|
Nozzle qty |
8 |
Net/Gross weight (kg) |
40/42 |
▶Suitable for soft to medium hard formations,such as limestone,sandstone,shale,etc.
▶Single row tooth structure,Welding high-performance wear-resistant materials on the surface of the blade.
▶High quality composite sheet gauge preservation,reduce gauge wear and increase the wear resistance and
stability of drill bit gauge retention.
▶Hydraulic structure optimization,Hydraulic balance design for simulating the flow field at the bottom of the well.
which is beneficial for cleaning and cooling the drill bit and preventing mud bags.
| φ215.9KS319G |
IADC Code S123 |
|
SPECIFICATION |
|||
|
Bit size(in) |
81/2" |
Connection |
4-1/2"API REG |
|
Bit size(mm) |
215.9 |
Recommended RPM(r/min) |
60-250 |
|
Number of blade |
3 |
Recommended WOB(KN) |
10-100 |
|
Primary cutter size(mm) |
19 |
Recommended flow rate(lps) |
25-36 |
|
Nozzle qty |
5 |
Net/Gross weight (kg) |
50/53 |
|
Gauge length |
2"-3.5" |
Overall dimension(mm) |
580×285×285 |
▶Suitable for soft formations,such as clay rock,sandstone,shaping mudstone,etc.
▶Deep blade wit long parabolic shape structure and anti swirl design,Maximizing the mechanical drilling speed and stability of the drill bit.
▶Welding high-performance wear-resistant materials on the surface of the blade,Enhance the wear resistance and erosion resistance of the bit.
▶Double row tooth,Reasonably configure high-quality PDC composite sheets,Optimize the tooth structure,improve the aggressiveness and abrasion resistance of drill bits.
▶Strengthening gauge with PDC composite sheets,Reduce the wear and tear of rocks on diameter preservation,Increase the wear resistance and stability of gauge,improve the service life of drill bits.
▶Hydraulic structure optimization,Flow field design at the bottom of the well is beneficial for the migration of rock debris and the prevention of mud bags.
| φ215.9KS516FC1 | IADC Code S323 |
|
SPECIFICATION |
|||
|
Bit size(in) |
81/2" |
Connection |
4-1/2"API REG |
|
Bit size(mm) |
215.9 |
Recommended RPM(r/min) |
60-250 |
|
Number of blade |
5 |
Recommended WOB(KN) |
10-100 |
|
Primary cutter size(mm) |
16 |
Recommended flow rate(lps) |
25-36 |
|
Nozzle qty |
7 |
Net/Gross weight (kg) |
55/58 |
▶Suitable for medium soft formations with high compressive strength and abrasive properties,such as limestone,clay rock,shale,etc.
▶Deep spiral blade with parabolic shaped structure and anti swirl design,Maximizing the mechanical drilling speed and stability of the drill bit.
▶Welding high-performance wear-resistant materials on the surface of the blade,Enhance the wear resistance and erosion resistance of the bit.
▶Double row tooth structure,Reasonably configure high-quality PDC composite sheets,Optimize the tooth structure,
low density cloth teeth,improve the aggressiveness and abrasion resistance of drill bits.
▶Reasonably optimize hydraulic structure,Maximizing waterway design and improving debris removal efficiency.
|
φ215.9KS813FG |
IADC code S433 |
|
SPECIFICATION |
|||
|
Bit size(in) |
81/2" |
Connection |
4-1/2"API REG |
|
Bit size(mm) |
215.9 |
Recommended RPM(r/min) |
60-250 |
|
Number of blade |
8 |
Recommended WOB(KN) |
10-100 |
|
Primary cutter size(mm) |
13 |
Recommended flow ratellps) |
25-36 |
|
Nozle qty |
4 |
Net/Gross weight(kg) |
68/72 |
|
Gauge length |
2"-3.5" |
Overall dimension(mm) |
580×285×285 |
▶Suitable for medium hard formations with high compressive strength and abrasive properties,such as limestone,hard gypsum, dolomite,sandstone,etc.
▶Deep spiral blade wing,short parabolic shape structure,antirotation design,Maximizing the mechanical drilling speed and stability of the drill bit.
▶Welding high-performance wear-resistant materials on the surface of the blade,Enhance the wear resistance and erosion resistance of the bit.
▶Double row tooth structure,Reasonably configure high-quality PDC composite sheets,Optimizing the tooth structure to improve the attack and abrasion resistance of the drill bit.
▶Using PDC composite sheets to lengthen gauge,Improve the lateral stability and compressive strength of the drill bit, reduce lateral offset and improve well bore quality.
▶Hydraulic structure optimization,Flow field design at the bottom of the well is beneficial for the migration of rock debris
and the prevention of mud bags.
|
φ311.2KS516FG |
IADC code S323 |
|
SPECIFICATION |
|||
|
Bit size(in) |
121/4" |
Connection |
6-5/8"API REG |
|
Bit size(mm) |
311.1 |
Recommended RPM(r/min) |
60-250 |
|
Number of blade |
5 |
Recommended WOB(KN) |
10-100 |
|
Primary cutter size(mm) |
16 |
Recommended flow rate(lps) |
40-55 |
|
Nozzle qty |
7 |
Net/Gross weight(kg) |
100/123 |
|
Gauge length |
2"-3.5" |
Overall dimension(mm) |
700×360×360 |
▶Suitable for soft to medium hard formations with abrasive properties,such as limestone,sandstone,shale,etc.
▶Deep blade parabolic shaped structure,anti rotation design Increase the depth of the blades,reduce torque,improve the drilling depth,
mechanical drilling speed,and stability of the drill bit.
▶Welding high-performance wear-resistant materials on the surface of the blade,Reasonably configure high-quality PDC composite sheets,Enhance the wear resistance and erosion resistance of the bit,Optimizing the tooth structure to improve the attack and abrasion resistance of the drill bit.
▶Strengthening gauge with PDC composite sheets,Reduce the wear and tear of rocks on diameter preservation increase the wear resistance and stability of diameter preservation,improve the service life of drill bits.
▶Hydraulic structure optimization,Flow field design at the bottom of the well.conducive to the migration of rock debris and
the prevention of mud bags.
| φ311.2KS716FGA | IADC Code S423 |
 |
 |
|
SPECIFICATION |
|||
|
Bit size(in) |
121/4" |
Connection |
6-5/8"API REG |
|
Bit size(mm) |
311.1 |
Recommended RPM(r/min) |
60-250 |
|
Number of blade |
7 |
Recommended WOB(KN) |
20-110 |
|
Primary cutter size(mm) |
16 |
Recommended flow rate(lps) |
40-55 |
|
Nozzle qty |
9 |
Net/Gross weight (kg) |
96/119 |
|
Gauge length |
2"-3.5" |
Overall dimension(mm) |
700×360×360 |
▶Suitable for soft to medium hard formations,such as limestone,hard gypsum dolomite,shale,etc.
▶The main cutting teeth adopt triangular PDC composite cutting teeth,Increase drill bit impact and wear resistance,extend the lifespan of drill bits,Increase the aggressiveness and stability of the drill bit,protect the main cutting teeth from premature wear.
▶Hydraulic design optimization,thoroughly clean and cool the drill bit.
|
φ444.5KS616 |
IADC Code S423 |
|
SPECIFICATION |
|||
|
Bit size(in) |
171/2" |
Connection |
7-5/8"API REG |
|
Bit size(mm) |
444.5 |
Recommended RPM(r/min) |
60-250 |
|
Number of blade |
6 |
Recommended WOB(KN) |
30-180 |
|
Primary cutter size(mm) |
16 |
Recommended flow rate(lps) |
45-70 |
|
Nozzle qty |
9 |
Net/Gross weight(kg) |
245/285 |
|
Gauge length |
2"-3.5" |
Overall dimension(mm) |
760×560×560 |
▶Suitable for soft to medium hard formations,such as shale,sandstone,chalk,etc.
▶Deep blade with long parabolic shape structure and anti swirl design,Increase blade depth reduce torque,improve the drilling depth,mechanical drilling speed,and stability of the drill bit.
▶Welding high-performance wear-resistant materials on the surface of the blade,Reasonably configure high-quality PDC composite sheets,enhance the wear resistance and erosion resistance of the bit,increase tooth density,improve the aggressiveness and abrasion resistance of drill bits.
▶High quality curved PDC composite sheet diameter retention,set shock-absorbing teeth,reduce gauge wear and increase gauge wear resistance and stability,Reduce drill bit vibration,Improve the stability of the drill bit,service life.
▶Hydraulic structure optimization,Flow field design at the bottom of the well is beneficial for the migration of rock debris and the prevention of mud bags;increase the number of nozzles,optimize the water circulation system of drill bits;balancing fluid flow is beneficial for cooling cutting teeth and reducing drill bit erosion.
| IADC 127-φ215.9 | IADC 127-215.9 Rubber seal |
|
SPECIFICATION |
|||
|
IADC code |
IADC 127 |
Recommended RPM(r/min) |
60-180 |
|
Bit size(in) |
8-1/2" |
Recommended WOB(KN/mm) |
0.35-0.85 |
|
Bit size(mm) |
215.9 |
Net weight(kg) |
38 |
|
Connection buckle type |
4-1/2"API REG |
Gross weight(kg) |
40 |
|
Tooth type |
Steel teeth |
Overall dimension(mm) |
255×255×405 |
|
Sealing type |
Rubber seal |
||
- Soft formations with low compressive strength and high drill ability,Such as mudstone,chalk,salt rock,soft limestone,etc
| IADC217-φ311.2 | IADC 217-311.2 Rubber seal |
|
SPECIFICATION |
|||
|
ADC code |
IADC217 |
Recommended RPM(r/min) |
150-60 |
|
Bit size(in) |
12-1/4" |
Recommended WOB(KN/mm) |
0.35-0.95 |
|
Bit size(mm) |
311.1 |
Net weight(kg) |
98 |
|
Connection buckle type |
6-5/8"API REG |
Gross weight (kg) |
100 |
|
Tooth type |
Steel teeth |
Overall dimension(mm) |
355×355×475 |
|
Sealing type |
Rubber seal |
||
Medium hard formation with high compressive strength Such as medium-soft shale,anhydrite,medium soft limestone, medium soft sandstone and soft formations with hard inter layer.
|
IADC 437-φ215.9 |
IADC437-215.9Metal seal |
|
SPECIFICATION |
|||
|
IADC code |
IADC 437 |
Recommended RPM(r/min) |
240-70 |
|
Bit size(in) |
8-1/2" |
Recommended WOB(KN/mm) |
0.35-0.9 |
|
Bit size(mm) |
215.9 |
Net weight(kg) |
38 |
|
Connection buckle type |
4-1/2"API REG |
Gross weight(kg) |
40 |
|
Tooth type |
TCI |
Overall dimension(mm) |
255×255×405 |
|
Sealing type |
Metal seal |
||
▶Suitable for extremely soft formations with low compressive strength and high drill ability,such as Clay,mudstone,gypsum,soft limestone.
▶Wear-resistant coating:Carbide wear-resistant material is applied to the palm tip and the edge of the tooth palm increase wear resistance and life of the bit.
▶Carbide centralizer embedded on the surface of palm,Reduce the wear of bit grinding formations,oblique well and horizontal well improve the life of bit.
▶Gouge inserts of high-quality tungsten carbide alloy,Reduce the wear of bit in grinding formations,improve the stability and life of bit.
▶High quality tungsten carbide tricone tooth,Reduce wear,increase the crushing capacity and life of bit.
▶Optimize water conservancy structure,Enhance the self-washing ability and life of bit.
http://www.tankdrill.com/